Portable 25V Wireless High Pressure Car Wash Machine

Specification :

Product name: Wireless High Pressure Car Wash Washer Gun
Material: ABS and Copper
Power Supply:Lithium battery
Weight: 15000mAh (About 2.3KG) / 30000mAh (About 2.6KG)
Drive: Lithium battery wireless drive
Rated pressure range: ≥ 2.5MPa and ≤ 25MPa
High pressure pump transmission input power: ≤ 10kw
Water pipe length: 5 meters
Car washing equipment type: Household Car Washing Machine
Water source type: Faucet / Self-priming
Scope of application: car washing, watering flowers, watering vegetables, spraying, garden cleaning, etc.

Features :

1. Special material waterproof, water and electricity isolation is safer
2. Self-priming/faucet 2 water inlet methods, more convenient to take water
3. 3 Water types adjustable
4.With temperature protection function, automatic shutdown of over temperature and overload, eliminating safety hazards
5.Large amount of water, easy to absorb water
6. A variety of high-quality extension accessories, cleaning is more convenient and clean
7. Multifunctional high-pressure cleaning, very suitable for car washing, garden watering, agricultural irrigation and daily cleaning
8. Simple installation, quick plug-in installation of all interfaces

Package included:

1x Wireless car washing machine
1x Lithium battery
1x Charger
1x 5m Water pipe
1x Water connection
1x Extension rod
1x Filter
1x Foam pot

Q & A

Q1: Why does the car washing machine not start after turning on the switch?he water pressure so small?
A1: Maybe the battery is out of power, please charge

Q2: Why is there no water after turning on the car washing machine
A2: Observe whether the water pipe is bent and the water cannot be released; press the car washer for more than 15 seconds and wait for the water to be sucked into the car washer

Q3:Water leaking from multi-function nozzle,Sudden increase in water pressure
A3:The multifunction nozzle is blocked,replace the nozzle

Q4:Water flows out after the machine is turned off
A4:There is water residue in the pump door after the machine is turned off

Q5:Foam bottle can’t spray ? cleaning agent
A5:Drain the water completely before storing foam bottle clogged,clean with water

Q6: It can be started, but there is little or no water from the nozzle?

A6:
It may be that the water connector is not pressed tightly. Press the water connector directly twice for the second time until you hear a click.
It may be that air has entered the fuselage or the water pipe. You can directly fill the fuselage with water with a tap to drain the air, and then spray water by self-priming.

Q7: Battery indicator light off?
A7:Use a screwdriver to disassemble the battery case, and press and tighten the four iron pieces at the four corners of the circuit board.

Q8: Battery charged but won’t start? Product does not start?
A8:It may be because the inserts inside the machine are loose or wet. Use a screwdriver to disassemble the battery case to see if the battery circuit board is wet. If it is only a little wet, it can be air-dried. If the entire circuit board is wet, scrape off any rusted areas and air dry. If it is not wet, just clamp the corners of the battery circuit board and a few iron pieces in the middle. If you don’t know how to disassemble the machine, you can try knocking the gun head down on the ground or on the table a few times.
During use, be careful not to seepage of water in the battery, it will be recharged every time it is used up, and the battery will be thrown upside down.
If you have any problem, pls feel free to contact us give you a best solution,OK?
Thanks in advance.

Warm Tips:

1.After the car wash machine is used, it should run empty for a few seconds to drain the residual water in the machine, avoid oxidizing dirt and freezing for weather reasons, and store it in a dry and cool place.

2.Do not store in the trunk of the car in hot weather to avoid fire caused by high temperature.

3.Batteries need to be kept away from water.Remove the battery after use, so as not to affect battery life.